首页  产品信息 光纤 | 光纤器件 光纤配件 OZ Optics 可视光纤故障定位仪

光纤配件

OZ Optics 可视光纤故障定位仪OZ Optics 台式多通道光衰减器OZ Optics 数字可调谐滤波器SMA905光纤连接器 显示全部
dow.png

OZ Optics 可视光纤故障定位仪

  • OZ Optics 可视光纤故障定位仪
  • OZ Optics 可视光纤故障定位仪
  • OZ Optics 可视光纤故障定位仪
  • OZ Optics 可视光纤故障定位仪
灵敏、可靠且便宜的光纤故障定位仪器,多种类型可选择!

所属类别:光纤 | 光纤器件 » 光纤配件

所属品牌:

产品负责人:

姓名:周工(Bart)

电话:131 6701 2283(微信同号)

邮箱: jianhang-zhou@auniontech.com

OZ Optics 可视光纤故障定位

可见光纤故障定位仪将 520 nm 或 635 nm 可见激光二极管光发射到光纤中。当光遇到断裂或急剧弯曲时,会发生散射,散射光可以从光缆中观察到。故障定位仪可以定位短跳线中的断裂,而 OTDR 由于其工作盲区而无法检测到。故障定位仪也比 OTDR 便宜得多。但是,不建议将它们用于深色或铠装光缆。

故障定位仪有四种尺寸可供选择:笔形、口袋形、台式和高功率非接触式台式。口袋形故障定位仪可以在连续波 (CW) 模式或脉冲调制模式下工作。脉冲调制有助于在高环境光条件下定位故障,并延长电池寿命。 2 Hz 调制易于肉眼检测,而270 Hz 和 2 kHz 脉冲调制模式则用于检测器识别光纤。

故障定位器的另一个用途是检查连接器质量。通常,即使用显微镜观察,连接器看起来也完好无损,但在连接器套圈内部,粘合不良或污垢可能会在光纤中造成微弯。这种微弯会产生过多的插入损耗或回波损耗,并可能导致连接器失效。如果将可见光发射到光纤中,使其从有问题的连接器中射出,就可以很容易地看到这种失真,就像一系列叠加在正常输出上的环。弯曲或扭转光纤可能会影响整体强度模式,但不会影响环形模式本身。

产品特征:

• 高可见度(使用 1 mW、635 nm 光源,可见距离可达 6 公里)

• 更高输出功率,高达 30 mW,提供非接触式电源版本

• 持续光或脉冲调制

• 电源选项包括碱性电池或 AC/DC 适配器

• 口袋型版本配备带腰带夹的便携包

• 提供 1.25 mm 和 2.5 mm 内径通用连接器插座

• 提供笔形、口袋型和台式版本

• 口袋型版本配备低电量指示灯

• 低成本、紧凑、坚固、轻便

• 提供 520 nm 绿色故障定位仪

• 可选内置衰减器,用于控制功率输出

• 用户可选自动关机模式

应用:

• 单模和多模光纤测试

• 光纤识别器应用

• 定位光纤和连接器中的断裂和弯曲

• 使用调制信号识别光纤并追踪光信号

• 优化熔接

规格参数表:

                  Parameter

Specification

Pen Size

Pocket Size

Bench Top

Bench Top
non-contact style

Wavelength

650 nm

635-660 nm

520 nm, 635 nm

Optical power
coupLED into
9/125μm

Standard

0.5 mW

1mW

0.3 mW

5 mW

Maximum

0.75 mW

1mW

  0.4 mW(1)

15 mW at  520 nm, 30 mW at 635 nm

Laser Classification
(for standard products)

Class 2

Class 2

Class 1

Class 3-B

Internal modulation mode

CW

CW,2 Hz,270 Hz,2 kHz

CW standard

CW, 2 Hz

Connector receptacles

Super NTT-FC/PC,Angled NTT-FC/PC,SC,AT&T-ST,
2.5 mm ID universal receptacle and 1.25 mm ID universal receptacle

Temperature

Operating

+5 to 45 C

Storage

-30 to60°C

-30 to 60°C

-20 to 60°C

-30 to 60C

Humidity

Storage:95% humidity, non-condensing at-20 to 60°C

Power Supply

AAA batteries (two).
22 hours operation.

AA batteries (two). 46 hours operation.(2)

110/220 VAC, 50/60 Hz
via a 5 V DC adapter (included).(3)

110/220 V AC, 50/60 Hz
via an optional 5 V DC adapter.(3)

Dimensions
(Wx Lx H) (4)

11 x 110 mm (∅x L)
(0.43x4.33 in.)

76x 127x 25.4 mm
(3.0x 5.0x 1.0 in.)

190 x 100 x 60 mm
(7.48 x 3.94 x 2.36 in.)

60 x 90 x 190 mm
(2.36x3.54x7.48 in.)

Weight(4)

75 g (0.17 lb.)

225 g (0.50 lb.)

Depends on
customer order

< 500 g

Note:

1) Limit for Class 1 device, as per lEC 60825-1. Higher power levels are available.

2)Battery lifetime with a 0.3 mW version .

3)See Standard Parts for power supply adaptors.

4)For high power versions, the dimensions and weight may change.


标准品订购信息表:

Bar Code Part Number

Description

Pen Size Fault  Locators and Accessories

42203

FODL-02.5U-650-0.5-FL

Pen Size Visible Fiber Optic Fault Locator with 650 nm wavelength, 0.5 mW output, and 2.5 mm ID universal receptacle, and CW/Flashing modes. Uses 2/ "AA" batteries.

High Power Bench  Top Fault Locators and Accessories

13775

FODL-32.5U-635-5

Bench Top Visible Fiber Optic Fault Locator with 635 nm wavelength, 5 mW output, and 2.5 mm ID universal receptacle.

13621

FODL-32.5U-635-10

Bench Top Visible Fiber Optic Fault Locator with 635 nm wavelength,10 mW output, and 2.5 mm ID universal receptacle.

13776

FODL-33S-635-5

Bench Top Visible Fiber Optic Fault Locator with 635 nm wavelength, 5 mW output, and super FC/PC receptacle.

7918

FODL-33S-635-10

Bench Top Visible Fiber Optic Fault Locator with 635 nm wavelength, 10 mW output, and super FC/PC receptacle.

20127

FODL-32.5U-520-5

Bench Top Visible Fiber Optic Fault Locator with 520 nm wavelength, 5 mW output, and 2.5 mm ID universal receptacle.

Pocket Size Fault Locators and Accessories (2AA Battery Version)

37113

FODL-43S-635-1

Pocket-Size Visible Fiber Optic Fault Locator with 635 nm wavelength, 0.9 mW output, and FC/PC receptacle. Uses 2 AA batteries or optional AC/DC adaptor.

37540

FODL-43A-635-1

Pocket-Size Visible Fiber Optic Fault Locator with 635 nm wavelength, 0.8 to 1 mW output, and an angle FC/APC receptacle. Uses 2 AA batteries or optional AC/DC adaptor.

27834

AC-5VDC-MULTI-PLUG-Z

Power supply,10 Watts, 5VDC output,1.6A,with power cord and multi-plugs for differentcountries. Output is 2.1mm center positive pin power plug.

24058

BC1

Optional AC adaptor and battery recharger for AA NiMH batteries. Two AA NiMH batteries included. For use with 110/220v AC.


关于非标定制的参数问题:

1. 您需要的MAX输出功率是多少?

2. 您喜欢笔型、口袋型还是台式型号?

3. 故障定位仪需要哪种类型的插座?

关于昊量光电

上海昊量光电设备有限公司是光电产品专业代理商,产品包括各类激光器、光电调制器、光学测量设备、光学元件等,涉及应用涵盖了材料加工、光通讯、生物医疗、科学研究、国防、量子光学、生物显微、物联传感、激光制造等;可为客户提供完整的设备安装,培训,硬件开发,软件开发,系统集成等服务。

您可以通过我们昊量光电的官方网站www.auniontech.com了解更多的产品信息,或直接来电咨询4006-888-532。


询问表格

* 号为必填内容
  • *
  • *
  • *
  • *
  • PC
    移动
    Pad

产品标签:光故障定位仪,VFL,光纤故障定位器,光纤故障定位仪,光纤故障检测笔,红光笔,通光笔,光纤笔,手持光纤故障定位器,寻纤仪,台式光纤故障定位器